Double sided servo tape is a staple for hobbyists and DIY enthusiasts working with RC cars, drones, and electronics. This guide highlights five top choices that balance strong adhesion, easy removal, and vibration damping. Each selection is well-suited for securing servos, ESCs, receivers, and other components without screws. Read on to compare rollout length, thickness, and compatibility to pick the right tape for your build.
| Product | Brand | Size | Notable Feature |
|---|---|---|---|
| Apex RC Products Double Sided Clear Servo Tape 10 Foot Roll | Apex RC Products | 3 m x 25 mm x 1 mm | Easy removal with minimal residue |
| Apex RC Products 3m X 25mm X 1mm 10′ Foot Double Sided Foam Servo Tape | Apex RC Products | 3 m x 25 mm x 1 mm | Super sticky, holds servos and electronics in place |
| Apex RC Products 3m X 25mm X 3mm 10′ Foot Extra Thick | Apex RC Products | 3 m x 25 mm x 3 mm | Extra thick protection against vibration |
| 2Pack ShareGoo 20mm x 2m Heat-Resistant Double Sided Tape | ShareGoo | 20 mm x 2 m (per piece) | Heat resistant for RC power systems |
| Double Sided Tape Heavy Duty by HitLights | HitLights | 16.4 ft x 0.94 in | High load bearing with waterproof adhesive |
Apex RC Products Double Sided Clear Servo Tape 10 Foot Roll
This 10-foot roll provides a long supply of clear, double sided foam tape designed for RC components. The tape’s 25 mm width and 1 mm thickness give a sturdy bond for securing servos, ESCs, receivers, and other electronics in cars, drones, and quadcopters. Users report easy removal with minimal residue, making it suitable for temporary or adjustable configurations in models that require frequent servicing.
Apex RC Products 3m X 25mm X 1mm 10′ Foot Double Sided Foam Servo Tape
This 10-foot roll features a dual-sided foam tape with a thickness of 1 mm. Its strong bonding capabilities are suitable for securing servos, receivers, and other electronics on cars and aircraft. The tape is described as “super sticky,” providing reliable adhesion on most surfaces, and is especially handy for projects that require a clean, screw-free installation.
LOVSOF Double Sided Tape Heavy Duty, 1 in x 16.5 ft
Designed for heavy-duty mounting, this tape comes in a long 16.5-foot length with a 1-inch width. It is engineered to deliver a strong hold while remaining easy to apply. The product emphasizes strong adhesion for automotive trim, dashboards, LED strips, and other electronics, with water resistance and temperature tolerance that suits high-vibration RC setups.
Apex RC Products 3m X 25mm X 3mm 10′ Foot Extra Thick Double Sided Foam Tape
This extra thick 3 mm foam tape adds cushioning to minimize vibrations that can affect sensitive electronics like ESCs and receivers. The tape is designed to hold servos, ESCs, receivers, and other electronics in place for vehicles, drones, and quadcopters, with the added benefit of vibration damping to protect delicate components during flight or off-road use.
Buying Guide: Choosing The Right Double Sided Servo Tape
Key considerations affect performance and long-term satisfaction when selecting double sided servo tape for RC projects and electronics installations. Here are important factors from multiple perspectives:
- Adhesion strength and surface compatibility: Look for tapes specified to bond with common RC surfaces like plastics, metal, and coated surfaces. Higher adhesion is beneficial for heavier assemblies, but may require stronger solvents or careful surface prep for removal.
- Foam density and thickness: Foam tapes come in varying thicknesses (1 mm, 3 mm, etc.). Thicker tapes better dampen vibration and fill gaps, while thinner tapes reduce bulk and fit in tight spaces.
- Temperature and humidity tolerance: RC environments can experience heat from motors and electronics or cold from outdoor flights. Tapes with good temperature resistance and moisture tolerance are preferable for durable installations.
- Residue and removal: For hobbyists who service models regularly, tapes that peel cleanly with minimal residue help avoid surface damage and tedious cleanup.
- Thickness vs. load bearing: Heavier payloads or larger components may require thicker or wider tape to distribute the load and maintain secure bonding over time.
- Application surface: Flat, smooth surfaces adhere best. Irregular or textured surfaces may require specialized tapes or surface prep (cleaning and drying) to ensure a solid bond.
- Electrical considerations: Ensure the tape does not conduct electricity and does not interfere with electronics or sensors. Some foams may be slightly insulative, which can be advantageous in certain layouts.
- Water and weather exposure: For outdoor or water-prone environments, choose tapes advertised as waterproof or highly moisture resistant to prevent degradation.
In practice, match tape thickness and width to the component size and mounting area. For quick trials, choose a tape with easy removal and clean peeling. For permanent mounts on RC aircraft or vehicles, prioritize thicker, vibration-damping options with higher load-bearing capacity. Always test a small area first to confirm adhesion and residue behavior before committing to the full installation.